Thursday, 10 August 2017

How to Choose the Right Light Bulb—Read the Label

Article courtesy of Feit Electric

With so many different types of light bulbs stuffed on the shelves of your local home improvement retailer, it can be difficult to determine which ones would be best for your house. Here’s where the Lighting Facts label found on light bulb packaging can come in handy—but only if you understand the data that’s provided.

The Lighting Facts label is modeled after the Nutrition Facts label on food packages and mandated by the Federal Trade Commission.  The purpose of the label is to provide shoppers with all the information they need to buy the most energy efficient bulb to meet their needs, but sometimes all the information can be a bit confusing.

Here is a guide to help you understand the most common terms used in lighting along with specs, and certifications.

Light Appearance (Light Color)

A light’s color is often measured by color temperature, represented in Kelvin (K). The “warmer” the light the lower the color temperature. Warm yellow home lights usually have a color temperature of around 2700K, while cold white lights range up over 5000K.

Energy Use

A light bulb’s watt indicates how much energy the bulb uses, but the labels of energy-efficient light bulbs like LEDs and other low energy bulbs list the ‘watt equivalent.’ The watt equivalent tells you how bright the bulb is compared to an incandescent of the same wattage. So, a 60-watt equivalent LED light bulb may only use 10 watts and be much more energy efficient than a 60-watt incandescent.

 

Lumens

A light bulb’s wattage is no longer the way we determine a bulb’s brightness. We now rate brightness in lumens; the more lumens, the brighter the bulb. To convert a light bulb’s brightness by watts, look at this handy chart.

Lumens / Incandescent light bulb (watts):

375 lm / 25 W
600 lm / 40 W
900 lm / 60 W
1125 lm / 75 W

Bulb Life

Most bulbs list their lifespan on the label in years, and some in hours. LED light bulbs typically do not burn out. Instead, the LED diode starts to fade over time and is considered useful until it’s decreased by 30 percent.

Energy Star

Light bulbs carrying the Energy Star service mark generally use 20–30% less energy than required by federal standards. Warranties must be longer than the industry norm (at least three years for LEDs and two for CFLs) and the Star may help you earn rebates from your utility, so check out energystar.gov/rebate-finder.

Mercury-Free

All LED light bulbs are mercury free. CFL bulbs, however, contain a small amount of mercury. You shouldn’t be too concerned, as the amount of mercury found in a standard CFL light bulb poses little to no health risk if it is disposed of and cleaned up per the guidelines from Environmental Protection Agency.

Notice – LED Blue Light Warning

Some LED manufacturers have added to their labels a warning about the dangers of exposure to blue light. Studies have shown that exposure to any light at night is associated with an increased risk of sleep problems. Warm bulbs with a light color temperature near 2700 kelvins are usually a better choice for the home than cooler bulbs that emit a greater amount of blue light, above 3000K.

CRI – Color Rendering Index

CRI is the measurement of how colors look under a light source when compared to how they look when bathed with sunlight. The higher the CRI the better you can see an object’s true color, like the difference between a pair of black or navy colored socks. CRI is measured from 0-100. The closer a light bulb’s color rendering index is to 100, the truer the colors would appear under natural light.

Omnidirectional

An LED light that shines in all directions. Omnidirectional A-type bulbs are ideal for area lighting.

It’s in the Numbers – PAR or BR Bulbs

PARs and BRs bulbs are used in recessed lighting fixtures or floodlights and have a number like 30 or 64 in their description. Divide the number by 8 to learn the bulb’s diameter in inches. You’ll need that number when picking bulbs for your fixtures.

The post How to Choose the Right Light Bulb—Read the Label appeared first on Electronic House.



source https://www.electronichouse.com/home-lighting/how-to-choose-the-right-light-bulb-read-the-label/

No comments:

Post a Comment